|
Land
Rover Accessories > Floor mats
Floor mats
Range Rover -
Discovery - Defender - LR3- Freelander - Series
Carpet Mat Sets: for rubber see
below
Is it long past time to replace those old, dirty, stained
and worn out original carpet mats? Nothing improves
the look of the interior faster than a fresh set! BP's
custom floor mats are made to the same standard as genuine,
but at a much lower price.
The deep pile and color matches your carpet, and the
heavy rubber backing prevents slippage. Additional clips
also help hold the mats in place. When dirty they can
simply be removed and hosed off.
The patterns are cut to exactly match the floor contours,
and the edges are stitched, not bound, for added toughness.
These mats come with a 2 year guarantee, a full year
longer than genuine. The mats are available as either
a 2 piece set - front only, 3 piece set - front and
back seat area or a 1 piece cargo mat.
|
 |
These
mats are made of DuPont ®100% continuous filament nylon
face. If you look at other companys mats and the yarn is not
identified as nylon, it's a sure indication that it's a lower
quality item. You can barely dig your fingers down through
the yarn to the bottom of the mat, it's that thick.
Please give us the model, year and the factory name of the
interior color when ordering. Please allow a few days for
delivery.
Mat colors:
|
Alpaca
|
Dark Granite
|
Sable
|
|
Ash Grey
|
Granite
|
Saddle/Walnut
|
|
Aspen Green
|
Gunstock
|
Sand
|
|
Bahama Beige
|
Jet (dark gray)
|
Smokestone
|
|
Beige
|
Navy
|
Sorrell Beige
|
|
Black
|
RR Grey
|
|
Order:
DISCOVERY SERIES I & II
2 PIECE SET LMFP
DISCOVERY SERIES I & II
3 PIECE SET LMTP
DISCOVERY SERIES I & II
CARGO MAT LMCP
DEFENDER 90 & 110
2 PIECE SET LMFP
DEFENDER 90 & 110
3 PIECE SET LMTP
DEFENDER 90 & 110
CARGO MAT LMCP
FREELANDER 2 PIECE
SET LMFP
FREELANDER 3 PIECE
SET LMTP
FREELANDER CARGO
MAT LMCP
RANGE ROVER 1 CLASSIC 100"
2 PEICE SET LMFP
RANGE ROVER 1 CLASSIC 100"
3 PIECE SET LMTP
RANGE ROVER 1 CLASSIC 100"
CARGO MAT LMCP
RANGE ROVER 1 LWB
2 PIECE SET LMFP
RANGE ROVER 1 LWB
3 PIECE SET LMTP
RANGE ROVER 1 LWB
CARGO MAT LMCP
RANGE ROVER 2
2 PIECE SET LMFP
RANGE ROVER 2
3 PIECE SET LMTP
RANGE ROVER 2 CARGO
MAT LMCP
LR3 2 PIECE
SET EAH500070PMA (Ebony
or Alpaca only)
LR3 HIGH SIDE CARGO MAT EBF500010
Heavy
Duty Rubber Floor Mats:
Range Rover II, Discovery 1 & 2
BP stocks heavy duty OEM quality rubber
mats for later Range Rover and Disco. They are form-fitted,
not generic, and tough enough to last for years. If you live
in rough country, or use your truck for camping, skiing,
or hunting, these are a must. The rear mats are in two sections
for easier cleaning and installation.

Disco
1 full set
Disco
2 front mat: detail close-up
Order:
Range Rover II '99-'02: |
front, pair GMS059 |
rear passenger set GMS060 |
Discovery 1 '94-'99: |
front pair GMS052 |
rear passenger set GMS053 |
Discovery II '99-'04: |
front pair GMS054 |
rear passenger set GMS055 |
LR3 |
Mat set, front & middle EAH50050PMA |
Heavy
Duty 3-Piece Molded Floor Set, Series II-IIA-III, 4 cylinder

Noise and
heat are two things that can really wear you down when driving
for hours in a Series truck. Anything that you can do to cut
those down really helps the fatigue factor. The old rubber
'County' mats from years ago were pretty good but are no longer
available. We found a set of great 'mats' (it's too wimpy
a word for these big boys) that will do the job and then some,
and they're far better than the old Land Rover sets.

The first
piece is the floor mat above: made of one piece molded
rubberized vinyl, this baby weighs 30 lbs. and is over 1/2
inch thick! You can see that it's molded to drop right in
and it includes the toe boards. If equipped with overdrive
you'll have to cut out a hole for the shifter, plus the high
beam switch and throttle stop. The edges are bevelled, and
it's molded to sit in position without any attachment hardware
(it ain't goin' nowhere). The footpad areas are cushioned,
and the3/8" tall horizontal strips will be perfect for mud
and water: simply use a broom or a hose to wash it out.

Included in
this 3 piece set is a seperate bulkhead cover. As any Series
driver knows, that right foot can get pretty toasty, even
with the heat shields in place. Your foot is still only inches
from the exhaust manifold, and a thin sheet of aluminum just
won't cut it. This molded piece slips right in to place, and
you use a few self tapping screws with washers or cups to
hold it in. It's high density and 1/4" thick, a good insulator
and looks great to boot.

The third
piece is this amazing seatbox cover, and what an item this
is! 30 lbs of high density material, perfectly molded in one
piece to seal up all of that gear whine and heat! It weighs
more than the box itself. Remove the seats, drop it in place,
cut out the mounting holes for the seats and the fuel selector
if so fitted, and pop the seats back on. Man, do Series rigs
need this! This 3 piece set has a nice pebbly finish similar
to a tight weave carpet, and the color is a brownish taupe,
perfect for hiding mud and dirt. Fit this set and heat and
noise simply gets knocked down to an acceptable level, making
your Series truck that much easier to live with on long runs.
Anyone who has a Series II-III and drives it will want this
set: it's a major upgrade. 3 piece set.
MMS11
Floor mats for 4
cylinder Series II and III

These molded deluxe floor mats are even higher
quality than the discontinued Genuine Land Rover items. The
'tread plate' pattern sits within a fairly deep lip, perfect
for snow and mud. The oval logo in the corner proclaims 'Series',
and they drop right in place, with no trimming. Weight
is a hefty 10 pounds for the pair, so these aren't the thin
'carpet runner' style: they will actually help keep noise
and heat down. Hose 'em off when they get dirty and toss 'em
back in. 2 piece set.
For Series trucks with 4 cylinder engines
(6's have a different floor area) GMS050
Return
to vehicle accessories page
Return to the page top
|