Specials and New Arrivals
Internet Land Rover Deals since 1997

Have you visited the 'Bulletin Board' page lately? It's kind of our 'blog spot'.
We put all kinds of Land Rover related stuff there. Click here to take a look!

Updated August 19

New, domestically made radiators for Range Rover 2,
'95-'98 and '99-'02

BP has found a local source for new radiators, made right here in Los Angeles. Because they are close by we can get them at a much better price, and naturally enough being BP we pass that right along to you. These have some nice additional features such as drain plugs added. Shown above is the '95-'98 GEMS version. Shop and compare!

either version $239.00

******

50 State Legal 5 Gallon Fuel Can with Holder

It's Y2K all over again! Worldwide demand for jerry cans are making them hard to keep in stock. No one knows why for sure, maybe it's those pesky Russkies kicking up again, maybe it's the Iranian bomb, or maybe it's high gas prices and fears of shortages. Or maybe it's the new Federal reguation for child proof caps making all NATO cans illegal (we kid you not). Whatever, cans are flying out of here like never before.

The CARB (California Air Resources Board) approved can is in stock. It comes with a lovely plastic spring loaded spout which is mandatory with every can per California law. The cans also come with spin-on metal caps for serious use (so if you loose the plastic spout the can is stil servicable and legal using a funnel).

The sturdy all metal holder is designed to lock over the cap (you provide the lock) and comes with rubber pads to resist scratching. It holds the can firmly in place, and multiple holes are provided for bolting the carrier where you want it.

Last chance at these prices: they're going up next month.

One 5 liter 50 state legal can with metal holder;
$84.00

******

Odd Lot Seats

Series seats are hard to get right now. The supplier we had bene using went out of business early in the year. We are working on a new supplier and hope to have full sets in stock shortly, but the prices will be higher. In the meantime we have a few odd pieces left: hopefully it will be just what someone out there needs.

Deluxe outer seat back. Black vinyl as used on Series III but often fitted to 2's and 2A's. We have just one seat back left:

$50.00 (you save $19)

This is a center set with a grey cloth face. They are narrower than the outers. They could be a good project starter for someone looking to fabricate a rear jump or forward facing seat. The style is similar to Denfender. You save $30.

$45/set

We have most of a Discovery 1 side facing jump seat retrofit kit. Land Rover stopped selling these as add ons due to safety and liability issues several years ago. We picked up a Genuine kit that's believed to be missing some small hardware items. Certainly all the big pieces are here: side panel, seat, brackets, and seat belt. As you can see this is a gray left side kit. It's sold as-is, no refund or warranty. These can be very hard to find in new condition, and we do not have a right side.

Land Rover part number STC7603LOY, originally sold for $865.00.

Special price $99.00

also...

We have one additional gray jump seat, no hardware or panels, same application as above. One screw holding the rear bracket is missing and that frame is bent a bit. There are some small nicks on the back of the seat, but the front is like new. If you have a damaged or worn seat here's a rare replacement. Or, use your fabrication skills to make your own jump seat. The fold down support bar is mounted in the bottom of the seat.
Sold as is, no refund or warranty.

$25.00

We also have a couple of standard Series II/IIA seat cushions. These are black vinyl for non adjustable seats. Orignially these would have been gray, but many folks have replaced them with basic black over the years. If you have a worn seat base this could be a good replacement for you. We have a few bases only, no backs at this time. They may have minor faults on the back but the faces are fine.

$30 each

******

Head Gasket Set: 4.0/4.6

For Disco 1 & 2, RR 2, '97 Defender. If you're going to be doing top end work such as vales or replacing head gaskets, you'll need this. We're currently overstocked and we need to move some out. Even if you aren't doing the job right away, having them handy is always a good idea at this price. Regular price is $110.00, seen elsewhere from $120 to $150. This is the same head set our professional shops use.

$89.00
Make sure you tell us you saw this price on the website or we'll charge you our everyday low price instead!

If the vehicle is a Disco II or Range Rover II you'll need to add one ERR6621 plenum gasket: $15.50.
When replacing heads you'll need new 'torque to load' stretch head bolts:
ERR2943 x 14, ERR2944 x 6: $63/set.

******

New Product:

Defender, Discovery 1 , Range Rover Classic

Wheel Spacers

When fitting wider steel rims and tires you can actually reduce your turning radius, which isn't that great to begin with. These 30mm (1 3/8") high grade aluminum spacers will push the tire center line out, which also improves side to side stability by widening the track. Folks who use their trucks both on and off the road like the way these feel. Our set includes 20 lug nuts for steel rims.

$390.00 set of 4

******

Special Purchase
Range Rover Classic Front Window Regulators
'87-'95 up to SA658966

BP bought some close-out stock from a local wholesaler, so that we can pass the savings on to you!

These are the front door window regulators, with motors as shown above, for almost all of the Range Rovers Classics. We have both left and right sides in stock (left side is the driver's door). Wiring plug included. You save $50 from what others charge without the motor!

These look pretty good, better than some of the cheaper replacements out there. Made in Italy. Shop and compare! Part numbers RTC3814 (right), RTC3815 (left). Limited supply, so don't delay.

$49.00 each

******